Please help - scooter wont start (tried several things)

cme · 04-14-2021, 12:21 PM

Could be a stator problem or CDI if you have no spark. Last year I bought a used VIP the motor turned over-had spark but no compression. I purchased a BBK and when I went to install it I found the crank was broke. I hope this is not your problem.
To check stator unplug the 2 wire connector--set VOM to 200 VAC place black on ground and touch the red lead to the (RED--RED//WHITE OR RED/BLACK) wire it should be above 40 VAC and less than 80 VAC. when hitting the start button with motor turning over.
Other problems I have encountered is VALVES not set correctly and oil seals on valves leaking and rings on piston bad

04-14-2021, 12:21 PM	#4
cme Join Date: Apr 2021 Posts: 3	Could be a stator problem or CDI if you have no spark. Last year I bought a used VIP the motor turned over-had spark but no compression. I purchased a BBK and when I went to install it I found the crank was broke. I hope this is not your problem. To check stator unplug the 2 wire connector--set VOM to 200 VAC place black on ground and touch the red lead to the (RED--RED//WHITE OR RED/BLACK) wire it should be above 40 VAC and less than 80 VAC. when hitting the start button with motor turning over. Other problems I have encountered is VALVES not set correctly and oil seals on valves leaking and rings on piston bad
	0