![]() |
|
![]() |
#1 |
![]() Join Date: Aug 2024
Posts: 2
|
![]()
Hello I am wondering if anyone can confirm or deny if the CPI Tracker/JV50's "output shaft" is the same spline as the Yamaha BWS?
I know they have different size wheels... But I have a custom sprocket adapter made from a old CPI Rim. I am looking at replacing the motor (was CPI) and purchasing a very cheap BWS for the motor. I don't want to have to ruin a good BWS rear wheel to make a new sprocket. This is on a trike build so I can mount the new motor/trans if I need to make brackets or what ever. I just need to be able to slide the sprocket onto the BWS power plant... I know both are Mineralli style (kits and variatiors being equal) but the fact they have a long case or short for wheel size make me wonder what else may be different after the final drive gears. If they are different splines.. is the final drive output shaft interchangeable? (take the CPI output and install in BWS box) |
![]() |
![]() |
#2 |
![]() Join Date: Aug 2024
Posts: 2
|
Nobody knows this?
I am surprised so many views but not one person knows if the 2005 BWS has same final output shaft as the CPI's ?
Lets try to word it this way, If I wanted to upgrade the final drive gears in a 2005 CPI Oliver/JV50, do I need to order a special one or does the Yamaha BWS final drive gears fit in the CPI. Another way to confirm is - I will count the splines on my CPI motor and see if anyone can confirm if BWS is the same. |
![]() |
![]() |
Tags |
bws, cpi, drive gears, final, yamaha |
|
|