Register FAQ Community Calendar Today's Posts Search
Go Back   ScootDawg Forums > Performance :: Maintenance :: Technical > 125cc - 249cc
Reply
 
Thread Tools Search this Thread Display Modes
Old 10-25-2014, 06:10 AM   #1
rks   rks is offline
 
rks's Avatar
 
Join Date: Dec 2013
Location: Western New York
Posts: 454
Sounds to me like it's running while auto enricher is on, then quits as engine warms and enricher closes. This would mean plugged idle jet or idle jet passages. This would also explain why it dies when you try to open throttle while it's running...You're giving it any extra shot of air, and it is still only receiving gas supplied by enricher. When you cleaned the carb, did you remove the jet and spray cleaner through to verify that the pathway to the tiny little holes located in front of the butterfly are open?

Before I spent any money on electrical components, I'd make sure fuel system was right. Fuel delivery lines, vac lines, and fuel filter, should be replaced...especially if they are OEM, black, rubber hoses. Ethanol laced gas turns these to mush from the inside out, over time... I would also pull the valve cover off, check clearances, and adjust them if needed.
__________________
2011 Jonway 150cc..16,109 breakdown free miles, and counting




Login or Register to Remove Ads
  Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:20 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.