|
|
|
Thread Tools | Search this Thread | Display Modes |
|
01-26-2013, 11:25 AM | #1 |
Join Date: Sep 2011
Location: staunton va
Posts: 319
|
I always have used wd-40 in my ignition and gas cap and i have had no issues
__________________
2010 Cpi Oliver 70cc, naruku trans kit, downhill handle bars, tecnigas rsll pipe, s6 4g rollers, Vento R4 with 90cc 1e52qmf technigas next r 100cc pipe Naruku, 21mm race carb, s6 4.5 g rollers |
01-26-2013, 11:27 AM | #2 |
Join Date: May 2011
Location: jeannette, pa STEELER COUNTRY
Posts: 123
|
ok i may be wrong here but
wd_40 fights water , correct? and corresion x is like 10 x's better, correct?
__________________
2008 Shanghai Schenke Motorcycle Company LTD model # SL-15021B added extra turn signals, brake lights on the trunk saddle bags and a windshield 67 mph top speed ALL STOCK verified by PSP "Hillary in 2016" |
01-26-2013, 11:31 AM | #3 | |
Join Date: Sep 2012
Location: West Haven CT
Posts: 1,165
|
Quote:
Its much more then that WD 40 doesnt even come close http://www.corrosionx.com/marine.html http://www.corrosionx.com/electronics.html Take care and ride safely dear friend Yours Hank
__________________
"4wheels move the body 2 wheels move the soul" Duty, Honor, Country. Those three hallowed words reverently dictate what you ought to be, what you can be, what you will be. Douglas MacArthur |
|
01-26-2013, 11:34 AM | #4 |
Join Date: May 2011
Location: jeannette, pa STEELER COUNTRY
Posts: 123
|
see i gain knowledge all the time
__________________
2008 Shanghai Schenke Motorcycle Company LTD model # SL-15021B added extra turn signals, brake lights on the trunk saddle bags and a windshield 67 mph top speed ALL STOCK verified by PSP "Hillary in 2016" |
01-26-2013, 11:49 AM | #5 |
Join Date: Aug 2011
Location: Tierra Azul, NM
Posts: 739
|
It's not an issue in climates that do not support the blowing of fine dry sand. Out here anything with wd-40 (or any oily substance) on it immediately becomes an oily dirtball. You don't want that in your lock. It may not be an issue as long as fine dust in the air isn't an issue
__________________
Do not fear mistakes. You will know failure. Continue to reach out. - Benjamin Franklin Join the HARDCORE 1983 Honda GL650I SilverWing Last edited by scootnwinn; 01-26-2013 at 12:17 PM. |
01-26-2013, 12:08 PM | #6 |
Join Date: Apr 2006
Location: South Haven Michigan
Posts: 225
|
Anytime a key does not work in these Chinese scoots...rotate the key 180 degrees and try it that way..upside down so to speak. I have found on MANY customer scoots that when the keys are cut...they DO NOT wire brush the key to remove any burs as they do when you get a duplicate house or car key made. The scoot keys typically arrive with rough edges and 'flashing' on them from the cutting process makes them not always work properly...
|
|
|