Tail light, horn, fuel gauge, blinkers not working after battery removal

qwertydude · 12-28-2013, 12:51 AM

It is also possible that the wires or a connector broke also try installing a new fuse. It's not unheard of that a fuse may look good but in reality is still open, especially with cheapy Chinese OEM fuses.

Another likely scenario is a poor ground. Trace the negative to where it connects to the chassis and remove and clean the connection, sometimes at the factory these are painted over. The ground contact should contact bare metal.

12-28-2013, 12:51 AM	#2
qwertydude Join Date: Jan 2010 Posts: 139	It is also possible that the wires or a connector broke also try installing a new fuse. It's not unheard of that a fuse may look good but in reality is still open, especially with cheapy Chinese OEM fuses. Another likely scenario is a poor ground. Trace the negative to where it connects to the chassis and remove and clean the connection, sometimes at the factory these are painted over. The ground contact should contact bare metal.
	0