Oil in the cylinder

Roscoe · 04-19-2020, 03:59 AM

Well, since you asked,

I'm thinking a disk brake caliper cylinder hone might work for you. Have you priced a new cylinder?

mtc900 · 04-20-2020, 08:58 AM

Thanks everyone for the suggestions. I got the new rings in after lightly sanding the cylinder with some scotchbrite - I don't have a hone. The scooter is running and after the initial burning off of the lubricating oil it seems to be working well.

I'll give it a little more break-in time and then get a good ride in (once the rains passes). If the issue comes back I'll probably just replace the cylinder.

Thanks again!

04-20-2020, 08:58 AM	#2
mtc900 Join Date: Mar 2020 Posts: 4	Thanks everyone for the suggestions. I got the new rings in after lightly sanding the cylinder with some scotchbrite - I don't have a hone. The scooter is running and after the initial burning off of the lubricating oil it seems to be working well. I'll give it a little more break-in time and then get a good ride in (once the rains passes). If the issue comes back I'll probably just replace the cylinder. Thanks again!
	0