|
|
|
02-02-2013, 09:17 AM
|
#2 |
 
Join Date: Sep 2011
Location: staunton va
Posts: 319
|
What carb came with the head it doesnt show at scrappys but check your cable its probably snagged on something, cause the head and or the carb shouldnt put you out any farther then stock ones
__________________
   2010 Cpi Oliver 70cc, naruku trans kit, downhill handle bars, tecnigas rsll pipe, s6 4g rollers, Vento R4 with 90cc 1e52qmf technigas next r 100cc pipe Naruku, 21mm race carb, s6 4.5 g rollers 
|
|
|
02-02-2013, 09:59 AM
|
#3 |
Join Date: May 2012
Location: missouri
Posts: 164
|
You must of got the 24mm carb, mine didn't fit either, so what i did is i removed the back bolt on the throttle cable took my dremel to the metal throttle sleeve so it pushed in farther once i got it in far enough i hooked it up and put a bunch of black tape on the back side and then secured the other end with the one bolt, works like a champ
__________________
B.A.M.F. tapout scoot 24mm carb 150cc intake performance exhaust A9 cam hoca big valve head 16/50 gears 9.25 gram dr pulley sliders koso variator 1.5k torque spring orange coil orange unlimted cdi uni filter gates premium belt 2012 taotao vip cy50a scrappys 110cc big bore kit 52mm "88cc" 100 main jet 38 idle iridium plug custom paint, leds and decals alarm system naraku hd crankshaft |
|
|
 |
|
|
Linear Mode
