|
|
|
11-29-2014, 09:09 PM
|
#1 |
 Join Date: Nov 2014
Posts: 3
|
idle high and low, high and low
I have a Znen 50cc gy6 that after it heats up it has an idle issue. It revs high and then low, over and over. I think the idle jet is dirty but wanted to others opinions on the matter. I don't think it's the auto chike because it's after it heats up and the choke is off.
|
|
|
11-30-2014, 08:39 AM
|
#2 |
 
Join Date: Oct 2008
Location: Hyde Park, NY
Posts: 1,058
|
Spray your intake manifold with WD-40 while it's idling. It sounds like you have a vacuum leak somewhere.
__________________
2008 Eagle Milano 150- 9,679 miles 2009 Honda Rebel 250- 10,434 miles 2009 CF Moto Fashion- 16,023 miles 2009 MC-114 50cc Cub Clone- 4,317 miles twowheeler.yolasite.com/ That's 30,049 China Scootin miles and Counting. |
|
|
|
12-28-2014, 07:52 PM
|
#3 |
 
Join Date: Feb 2014
Location: las vegas
Posts: 100
|
yup, if your idle is hunting you should check th o-ring in the intake manifold and the clamp on the carb, if you have an egr system take the line off the intake manifold and cpver it with your finger and try it
__________________
2012 Jonway X 44mm Hoca crank 52mm Hoca big bore MMS big valve head raised ports, polished, milled .023 Hoca 26mm carb NCY titanium valve springs NOS wet nitrous system Holley fuel pump MMS variator Naraku CDI HT coil 4' Wheelie bar MMG stainless slip-on exhaust NGK "11" spark plug UNI filter 2014 Icebear Maddog too much to list http://mmsscooters.com |
|
|
 |
|
|
Linear Mode
