|
04-08-2017, 10:33 AM | #3 | |
Join Date: Apr 2017
Location: In the Woods under a Oak Tree
Posts: 19
|
you can do it
Quote:
As for the Fluids you will have to change the fluid in the "transmission" and in the "engine", If I remember right I used the suggested 10w-40w motor Oil. As for Vacuum lines you may have to change. I did replace on line between the carb and the intake manifold but that was my choice. I have two between the carb and intake butt that was my choice because I did not like the way the hose looked when it was under vacuum. Also will caution on the Valves on a GY6, they do go out of adjustment and your machine may not start. But if I can adjust them well you can too. Mine needed adjustment only after 174 miles. It takes 45 minutes to adjust the first time and even less with experience. Don't freak if you scooter just quits most of the time you will see it is just a valve adjustment and also always run at least 90 octane gas. 87 has too much ethanol in it and it will eat your fuel lines or the diaphragm in the carb. As for the DMV issue I took my paperwork that came with the machine and all went thru just fine. Only thing I have read on folks having trouble registering the machine out in California because of their emission laws. Best Regards, Bonehead |
|
|
|