Register FAQ Community Calendar Today's Posts Search
Go Back   ScootDawg Forums > Performance :: Maintenance :: Technical > 50cc - 124cc
Reply
 
Thread Tools Search this Thread Display Modes
Old 03-25-2021, 06:07 PM   #1
veliz11   veliz11 is offline
 
Join Date: Mar 2021
Posts: 1
Sad Please help - scooter wont start (tried several things)

*First off, i'm new to the group. glad to find a scooter community and very thankful for your help in advance!!

I want to get this 2006 Honda Metropolitan working. it makes sounds like it wants to crank but as soon as i let go of the start button it dies off. see video.

I already did the following:
-replaced battery
-replaced spark plug
-added oil and gas



Youtube video:



Login or Register to Remove Ads
  Reply With Quote
Old 03-25-2021, 06:57 PM   #2
Admin   Admin is offline
 
Join Date: Apr 2011
Location: NY
Posts: 994
Welcome to the forum!

Have you checked for spark? Checked if fuel is flowing to carb? If those check out, the carb might be dirty and needs a cleaning.
  Reply With Quote
Old 04-05-2021, 08:39 AM   #3
Roscoe   Roscoe is offline
 
Join Date: Nov 2016
Location: N. of Texas and S. of Kansas
Posts: 252
How I do it.... charge the battery or jump from a good battery, make sure it cranks good, a shot of carb spray into the intake... if it fires and runs a bit it's some kind of fuel problem. If it doesn't run a bit, check for spark, if it has spark check for compression. Do not burn the starter out when trying to get it started. Use only 100% gasoline... stay away from ethanol gas and you will reduce your problems 1000% maybe even more...



Login or Register to Remove Ads
  Reply With Quote
Old 04-14-2021, 01:21 PM   #4
cme   cme is offline
 
Join Date: Apr 2021
Posts: 3
Could be a stator problem or CDI if you have no spark. Last year I bought a used VIP the motor turned over-had spark but no compression. I purchased a BBK and when I went to install it I found the crank was broke. I hope this is not your problem.
To check stator unplug the 2 wire connector--set VOM to 200 VAC place black on ground and touch the red lead to the (RED--RED//WHITE OR RED/BLACK) wire it should be above 40 VAC and less than 80 VAC. when hitting the start button with motor turning over.
Other problems I have encountered is VALVES not set correctly and oil seals on valves leaking and rings on piston bad
  Reply With Quote
Old 04-15-2021, 04:25 PM   #5
Duke11   Duke11 is offline
 
Join Date: Apr 2020
Posts: 4
You can check for life pulse with an quickstart fluid solution which you spray in air feed.
If not then , as stated above it might could be stuck valves or something more serious



Login or Register to Remove Ads
  Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:17 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.