Adjusted Valves now scooter bogs?

ventoman · 05-08-2014, 04:12 AM

Sounds like your main jet in the carb is dirty.

whitney1207 · 05-08-2014, 11:09 AM

i adjusted mine to .05mm or .002 inches and it runs great. I know there is a wide debate about what to adjust your valve clearance to. But if the only adjustment you made was the valves and it's bogging down.. try it a little tighter and see if you get better results.

hkpotts44 · 05-08-2014, 12:44 PM

Quote:

Originally Posted by ventoman

Sounds like your main jet in the carb is dirty.

Took carb apart(was a sealed one so a lot of fun there lol) Scooter now goes faster but still is bogging. I replaced plug with NGK c7hsa still no change. On the carb the slide is half way down and never moves, could this be a problem since it never opens up all the way?

05-08-2014, 11:09 AM	#2
whitney1207 Join Date: Apr 2014 Location: Las Vegas, NV Posts: 32	i adjusted mine to .05mm or .002 inches and it runs great. I know there is a wide debate about what to adjust your valve clearance to. But if the only adjustment you made was the valves and it's bogging down.. try it a little tighter and see if you get better results. __________________ D_Whitney 50cc Taotao VIP 139qmb, 18mm carb
	0