Register FAQ Community Calendar Today's Posts Search
Go Back   ScootDawg Forums > Performance :: Maintenance :: Technical > 50cc - 124cc
 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
Old 08-03-2014, 11:15 AM   #1
ratdude747   ratdude747 is offline
 
ratdude747's Avatar
 
Join Date: Aug 2014
Posts: 9
72CC Carb issues

I have a 50CC (bore kitted to 72CC) Gy6 that has a horrible lean pop during deceleration... i found that turning out the idle mix screw on the carb (new, Jetted to 80, 90 ran too rich) fixed that but KILLED my idle...Which leads me to think it's a coasting enricher issue?

Also, when the choke hasn't warmed up, it's impossible to start w/o giving it some gas... as soon as the choke warms up, the engine runs GREAT. Basically, the choke is over-riching the mix at cold start. Is this normal and would a manual choke conversion fix this? I'd rather not JB weld the passages as I want it to start on cooler mornings.

Suggestions?

PS- The scooter was a freebie but needed a new carb and a motor rebuild (hence the bore kit) among other things.



Login or Register to Remove Ads
  Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:28 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.