|
|
|
04-16-2022, 02:03 PM
|
#1 |
 Join Date: Nov 2013
Posts: 9
|
150cc Doesn't run right with intake/filter on
I bought an SNL 150cc
I replaced the carb and some other components as it did not run. Got it running and noticed with the stock intake (and the new nibbi tube and cone filter) it hesitates when it gets around 30-40 at full throttle. I tried to adjust the carb and can get the hesitation to move up to 40 but can not get it to go away. When I remove the filter and tube and run just the carb it runs great I have little choices in intakes and filters because i have the cross member the intake has to go under. I could not install the nibbi intake manifold its too long and the carb his the cross member. I am wondering if its the slide in the carb that opens with airflow. I would go with another carb but because of this cross member I'm not sure what will fit. I could turn the carb around and face forward, then i'm very limited on space. I can't find pictures of other people with this cross member seems many have an open area this is the crossmember 
|
|
|
04-17-2022, 03:54 PM
|
#2 |
 
Join Date: Oct 2008
Location: Hyde Park, NY
Posts: 1,058
|
What happens if you run the stock airbox and stock filter?
__________________
2008 Eagle Milano 150- 9,679 miles 2009 Honda Rebel 250- 10,434 miles 2009 CF Moto Fashion- 16,023 miles 2009 MC-114 50cc Cub Clone- 4,317 miles twowheeler.yolasite.com/ That's 30,049 China Scootin miles and Counting. |
|
|
|
04-22-2022, 07:23 PM
|
#4 |
|
Join Date: Apr 2022
Posts: 1
|
Make sure the diaphragm is fully seated in the top of the carb
|
|
|
 |
|
|
Linear Mode
