|
|
|
03-06-2013, 12:59 AM
|
#1 |
 Join Date: Sep 2012
Posts: 27
|
Milano Headlight Wiring Diagram
I have a 2007 Milano with a three wire socket for the headlight. I have continuity between all three wires and all three wires go to ground. The dimmer switch seems to work because I can get an open circuit if I go to high beam setting. I can't find a diagram for the headlight and would appreciate any help.
|
|
|
03-06-2013, 03:59 AM
|
#2 |
 
Join Date: Aug 2011
Location: Tierra Azul, NM
Posts: 739
|
there's no way all three should go to ground one should be power... I'll see if I can find one someone here may already have one... Hope you find it...
__________________
 Do not fear mistakes. You will know failure. Continue to reach out. - Benjamin Franklin Join the HARDCORE 1983 Honda GL650I SilverWing |
|
|
|
03-06-2013, 02:00 PM
|
#5 |
|
Join Date: Sep 2012
Posts: 27
|
scootnwinn,
This is much better than fantastic. I have added this to my bookmarks. The answer to my problem was pretty simple. I ran the engine and the headlight came on like a champ. What I don't understand now is why all the other lights (turn signals, brake lights, work with just key on. From what I can tell from the diagrams, the headlight is getting power from the rectifer. Again, thanks. |
|
|
|
03-06-2013, 02:14 PM
|
#6 |
|
Join Date: Aug 2011
Location: Tierra Azul, NM
Posts: 739
|
That is a common configuration. I assumed you had started the bike before oops. This happens when you have an AC charging system...
__________________
Do not fear mistakes. You will know failure. Continue to reach out. - Benjamin Franklin Join the HARDCORE 1983 Honda GL650I SilverWing |
|
|
|
03-06-2013, 03:11 PM
|
#7 |
|
Join Date: Sep 2012
Posts: 27
|
Never underestimate the dumbness of a retired judge.
|
|
|
 |
|
|
Linear Mode
