Multiple issues, please help

bull · 05-15-2016, 09:55 AM

Put your battery on a trickle charger and allow it to fully recharge.

Reinstall the cvt cover. Remember to lightly lubricate the starter drive bushing in the cover before installing.

Remove the spark plug, and crank the engine over using the starter-- about 30 seconds of crank time maximum. Listen for abnormal noises.

If no abnormal noises, reinstall the plug and start the engine if it will. Again allow it to warm up and listen for abnormal noises both cold and at operating temp.

Then check for noises at different rpm.

05-15-2016, 09:55 AM	#9
bull Join Date: Feb 2015 Posts: 257	Put your battery on a trickle charger and allow it to fully recharge. Reinstall the cvt cover. Remember to lightly lubricate the starter drive bushing in the cover before installing. Remove the spark plug, and crank the engine over using the starter-- about 30 seconds of crank time maximum. Listen for abnormal noises. If no abnormal noises, reinstall the plug and start the engine if it will. Again allow it to warm up and listen for abnormal noises both cold and at operating temp. Then check for noises at different rpm.
	0