|
|
|
08-03-2020, 05:34 PM
|
#1 |
 Join Date: Jul 2019
Posts: 4
|
Will Wolf luck 50cc frame fit 150cc motor?
I have a wolf lucky 50cc that has a broken piston connecting rod or blasted piston and has no compression. Probably easier and more cost effective to get a new 50cc gy6 and swap the whole motor im thinking.
Im wondering if anybody knows if the 50cc frame will fit a 150cc gy6? How do I know if I have a long case/short case/ or other gy6 in order to match up a new motor? If I go this route obviously it will need a 150cc carburetor but how about the exhaust and rear wheel to engine shaft fitment? Thanks in advance!! Its a 2014 wolf lucky 50cc. |
|
|
08-11-2020, 08:25 PM
|
#2 |
 
Join Date: Oct 2008
Location: Hyde Park, NY
Posts: 1,134
|
The first road block is the difference in engine mounting. A 50cc engine mounts under the motor, the 150 mounts on top. Without knowing the difference in frame tube diameter I would be leary of flex. From what i have seen the 50 and 150 Wolf lucky appear to share the same plastics.
__________________
2008 Eagle Milano 150- 9,679 miles 2009 Honda Rebel 250- 10,434 miles 2009 CF Moto Fashion- 16,023 miles 2009 MC-114 50cc Cub Clone- 4,317 miles twowheeler.yolasite.com/ That's 30,049 China Scootin miles and Counting. |
|
|
|
08-22-2020, 01:25 PM
|
#3 | |
|
Join Date: Jul 2019
Posts: 4
|
Quote:
I see one on scooter dynasty but the wiring harness connection they show has three wire (green white and yellow) on the main wiring harness clip and it looks like the one in the bike now only has two wires there. Can anybody inform me on whether this motor will work or if I need to look elsewhere. There must be an exact match motor to purchase without having to mess around with swapping magnetos right? Thanks in advance 
|
|
|
|
 |
|
|
Linear Mode
