|
|
|
04-28-2013, 05:27 PM
|
#1 |
 Join Date: Apr 2013
Posts: 1
|
compression?
I've got a 150cc jmstar and I cleaned the carb and did a compression test, but it's reading 125 on my compression so I put a little oil in the cylinder and compression jumped to 150. So I think it may be the rings.. And also when I start it up it'll run fine for about 30 seconds then the motor revs high without me giving any throttle. any suggestions to what it could be?
|
|
|
04-28-2013, 09:55 PM
|
#2 |
 Join Date: Jan 2010
Posts: 139
|
Possible air leak in the intake somewhere. Also have the valves been adjusted?
|
|
|
|
04-29-2013, 03:22 PM
|
#3 |
Join Date: Aug 2011
Location: Buncombe Co. N.C.
Posts: 337
|
If putting oil in the Cylinder raises compression, then you probably have a scarred cylinder, or wore rings.
__________________
2007 Sportiva Falcon GY6 150 4T 7,200+ Mi. 68 ( GPS Verified ) 76 MPG Few Mods, Lots-O-Tweaks 2003 Vento Zip R3i TurboCam 50cc 2T 8,500+ Mi. 62mph ( GPS Verified ) 90 MPG Seriously Modded Check out the new group for the Mountain Area! http://www.scootdawg.net/group.php?groupid=4 |
|
|
|
04-29-2013, 09:08 PM
|
#4 |
|
Join Date: Jul 2008
Location: way up north in arkansas
Posts: 99
|
How many miles have you put on it? If it is new or low mileage the rings may not be seated. If there is a lot of miles on it you can make plans for new rings or top end.
__________________
1983 Yamaha Riva 180cc 2007 Yamaha Majesty 400cc |
|
|
 |
|
|
Linear Mode
