Advancing timing on gy6

[bull]

Originally Posted by padly1995

To advance timing i must move pickup to the left right (towards the exhaust)?
As much as my logics works moving pickup to the right would be retarding the ignition?
I just saw a picture on the web that is making me crazy :S

What do you think is advancing timing on 75cc gy6 even worth of doing?

Thanks!

Originally Posted by padly1995

One more quiestion...
While ago my oil seal on crankshaft started leaking, so i repleaced it, but when it was leaking scooter was going a little bit faster and it was also reving higher...?

To advance timing move the pickup / crank sensor counter-clockwise as viewed with the fan cover off, looking at the flywheel.

advancing timing on 75cc gy6 : yes, but you must use premium fuel or detonation will occur

oil seal on crankshaft started leaking = most likely the performance gains were because the oil was originally over full, don't trust the service manual or the dip stick for correct oil level at full. i put in 550cc of oil and it runs best as a rule of thumb