Is it easy or not...

[Frank Castle]

Originally Posted by blueboy5000

Yeah the mixture screw can be a pain to get at. On my bike, I have to remove the side cover.

Your idle should be set around 1600-1800 rpms.

i found alittle hole where i can squeeze in my screwdriver, btw, which way do i go to enrich it, as far as the mixture screw, is it left or right?

[Frank Castle]

Carb project update: finally got my NEW carb (Sheng Wey, taiwanese made) in the mail today and my new fuel hose (helix brand, blue color). now im just waiting for my main jet, which i upgraded to 108, it comes stock with 105

[Frank Castle]

Just to clarify besides having a leaking carb, which was not the carb, it was a broken drain hose, i decided to buy a new carb anyway cause my scoot has a hard start since i bought it and it was getting worse. so buying a new carb would fix 2 problems (drain hose and hard start issue)...when i got home today from work, i put in the new main jet (108) on my new carb just to get a head start, im off tomorow from work so you know what that means, time to work on the scoot, besides installing my carb and fuel line, i noticed that my fuel line did not have a decline angle so i will be rerouting the fuel line and aligning the fuel filter and fuel pump in a decline for better gas flow

[inuyasha]

Hi
Your doing a fine job once you install the new carb do a plug chop as its a good way to determine o if your jet size is correct and your air/ fuel mixture is right or its too llean or rich
http://www.mopedarmy.com/wiki/Plug_chop
Take care and ride safely my friend
Yours Hank

[Frank Castle]

that helix fuel hose was hard to get into, just replaced & re-routed the fuel line, it took me 3 hours (don't laugh, ran into some trouble), tomorow will be installing carb (yikes)

[Gimpdog]

You would think what should be simple to work on should be just that, simple. But no, the god of scooter repair always gets the last laugh.... Hahahahaha!

[Frank Castle]

Originally Posted by Gimpdog

You would think what should be simple to work on should be just that, simple. But no, the god of scooter repair always gets the last laugh.... Hahahahaha!

yeah, your right, the scooter repair god was laughing at me for 3 hours...FML

[Frank Castle]

Bad News:: i knew i shouldnt have tried and be mr. mechanic, so i install the new carb today and the fuel line yesterday then when i try and start my scoot today, ITS NOT STARTING ???? i noticed that the gas has reached the fuel filter but very little and the fuel hose that connects with the carb has no gas in it at all, could this be a vacuum issue, im so frustrated rite now, it has a brand new carb i tried starting it about 5 times plus one of the times i tried it the battery seemed slow, so now i have a battery issue?

[Frank Castle]

now the scooter started (yay) but the idle seems high (4000 rpms) and the wheel is spinning like crazy...

[Frank Castle]

Question:: where does the rpms have to be when its idle, my wheel starts spinning at 3000 rpms, the wheel STOPS spinning at 2700 rpms, should i leave it at 2700 or i heard that the normal rpms is at 2000 rpms for a scoot, which one is it?? i made a video

[remedyman]

Usually tighter (clockwise) will lean out the mixture, but then I am not scooter expert. I, in fact, am reading all this to help learn what my son needs to do with the one he just bought yesterday.

[Frank Castle]

*****Update**** issue was fixed with a new carb & setting up the mixture and speed screws CORRECTLY. I made 2 other threads based on this hard starting issue.

[05zuma]

An hour ha I can clean and put mine back on in 15 mins max