150CC GY6 High RPM reading, no headlights, no signal lights, no horn

coreyman · 05-18-2017, 09:47 AM

Well guys sorry for the late update but I figured it out, a lead on the horn came loose, and a barrel connector on the 'green' wire in the main wiring harness came loose. This was probably due to the horriblly bumpy potholed roads I travel on. I did away with the barrel connector on the green wire and soldered the wires together then heatstrinked. I also heatshrinked the horn lead on so it wouldn't come off again. All has been well now!

05-18-2017, 09:47 AM	#2
coreyman Join Date: May 2016 Posts: 34	Well guys sorry for the late update but I figured it out, a lead on the horn came loose, and a barrel connector on the 'green' wire in the main wiring harness came loose. This was probably due to the horriblly bumpy potholed roads I travel on. I did away with the barrel connector on the green wire and soldered the wires together then heatstrinked. I also heatshrinked the horn lead on so it wouldn't come off again. All has been well now!
	0