|
|
|
|
|
06-10-2013, 08:35 PM
|
#2 |
 
Join Date: Mar 2013
Posts: 27
|
I unplugged the entire stator 3 wire connection where it joins the wiring harness. The stator is putting out about 15 vac at idle, 26 vac at about 3k rpm. I will have time this coming weekend to isolate each bulb socket and wire. Until then I am riding the scoot to and from work, during daylight hours of course.
|
|
|
06-10-2013, 11:07 PM
|
#3 | |
Join Date: Mar 2013
Location: Spokane Valley WA
Posts: 41
|
Quote:
You didn't state which wires you tested and what results you got for each stator wire with it unplugged. |
|
|
|
|
09-01-2013, 03:34 AM
|
#4 |
|
Join Date: Sep 2013
Location: Hawaii
Posts: 1
|
Can anyone answer this riddle. I am having headlight issues myself. I have a 2008 Vento Zip "Li" Two stroke. I turn key on. Start scooter: horn works, blinkers work. tail light works. Head light do not work or side, daytime running lights. What does work, is, when i flicker the bright headlight by pushing down.
What i have done so far to check problems: 1. clean the contacts in the right housing by throttle 2. Replaced main head light bulb and both day time running light bulbs. 3. Diagnosed wires from lights. they are good. What i am not sure about is when i move the switch position for headlight, daytime running lights and in off position and nothing happened. When the motor is running the lights on the dash used to go brighter when i gave more throttle. Could it be: a stator, contacts in right housing gone bad, Regulator/rectifier? Please HELP!!! |
|
|
|
09-05-2013, 06:10 PM
|
#5 |
|
Join Date: Sep 2012
Posts: 27
|
This was a great thread to read. An interesting and common problem, some really good tech advice, great diagrams, and a little drama. I hope you will let us know what the problem turned out to be when you finally find it. I am confident from your comments that you have the ability and persistence to do it.
Finaljudgement |
|
|
 |
| Tags |
| headlight, lights, rectifier, stator |
|
|
Hybrid Mode
