Register FAQ Community Calendar Today's Posts Search
Go Back   ScootDawg Forums > Performance :: Maintenance :: Technical > 125cc - 249cc
 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
Old 01-28-2014, 12:44 PM   #2
gitsum   gitsum is offline
 
Join Date: Jun 2010
Location: southern Arizona
Posts: 37
8000 rpm's is about as far as you should push a GY6 if you want it to last. On a 125/150cc engine the max horsepower is probably closer to 7000 rpm's. If you do a lot of longer highway rides 7000 rpm's is a safer guideline.

Most 150cc scooter don't have a rev limiter. The first step would be to try lighter variator weights. You want the engine to pull 6500 - 7000 or so rpm's under full throttle, probably no more than 7500 rpm's at top speed on level ground with a favorable tail wind. I wouldn't advise running WOT for extended distances.

It wouldn't hurt to check the carb tuning, chances are it is set up borderline lean. 60 mph on the speedo is probably closer to an actual 50 - 53 mph.
  Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:57 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.