Register FAQ Community Calendar Today's Posts Search
Go Back   ScootDawg Forums > Performance :: Maintenance :: Technical > 125cc - 249cc
Reply
 
Thread Tools Search this Thread Display Modes
Old 02-03-2013, 10:39 AM   #1
solkor   solkor is offline
 
Join Date: Aug 2012
Posts: 7
Carburator problem.

I havent started my GY6 125 scooter for 2 months.
So today i try to start it , and after first 2 attemps to start , the fuel started to flow out from the air filter.
I think the carburator float doesnt lock the fuel .
How do you think?



Login or Register to Remove Ads
  Reply With Quote
Old 02-03-2013, 11:23 AM   #2
scootercapecod   scootercapecod is offline
 
scootercapecod's Avatar
 
Join Date: Jun 2010
Location: Lower Cape Cod
Posts: 64
Take off the carb and give it a thorough cleaning. Take everything down and let the carb sit in cleaner for a night, then use pipe cleaners to unclog anything and compressed air to dry it out.
__________________
Genuine Buddy 50CC 2T All stock. ASS, GAS OR GRASS...NOBODY RIDES FOR FREE!!!
  Reply With Quote
Old 02-03-2013, 05:30 PM   #3
50cc   50cc is offline
 
50cc's Avatar
 
Join Date: Oct 2012
Location: Germany
Posts: 140
Yeah, check the float pin and convert to manual petcock to be sure.
__________________
50cc 139QMB, 7g sliders, manual petcock w/ transparent lines, Naraku CDI, Naraku belt, high output racing coil, 18.4mm CVK clone w/ #85 mj and #38 idle, needle @ leanest, OEM pipe mod, Kenda tires, NGK Iridium, lots of LED mods, 2.61L/100km (90 MPG)



Login or Register to Remove Ads
  Reply With Quote
Old 02-12-2013, 11:07 AM   #4
blueboy5000   blueboy5000 is offline
 
blueboy5000's Avatar
 
Join Date: Jul 2011
Location: Connecticut
Posts: 493
I highly doubt it's the petcock. Sound like a stuck float. Remove your carb, take off the bowl, remove your jets and float and thoroughly clean with carburetor cleaner.
  Reply With Quote
Old 02-12-2013, 11:22 AM   #5
scootnwinn   scootnwinn is offline
 
scootnwinn's Avatar
 
Join Date: Aug 2011
Location: Tierra Azul, NM
Posts: 739
ya the float should not be overwhelmed by the petcock clean your carb and you're good
__________________


Do not fear mistakes. You will know failure. Continue to reach out.
- Benjamin Franklin

Join the HARDCORE

1983 Honda GL650I SilverWing



Login or Register to Remove Ads
  Reply With Quote
Old 02-27-2013, 02:19 AM   #6
8307c4   8307c4 is offline
 
Join Date: Feb 2013
Posts: 9
Fuel in the carburetor presents a very unique problem, the exact implications of which leaves many the inexperienced engine operator unaware, but fuel in the carburetor presents a very real risk of having fuel contaminated the engine oil and if that is the case, the engine oil HAS to be changed immediately and certainly before the engine is even started.

It's very simple, when fuel leaks into the carburetor it's but one short step down the intake and into the cylinder where it sits and slowly seeps into the oil reservoir, it is a problem all carbureted engines are prone to experiencing.

Failure to address fuel contaminated oil can (and will) result in severe premature engine wear.
It won't kill the engine right away, and it takes time but it can lead it to smoking heavily and consuming oil and loss of power and compression and it needs to be addressed as the damage starts to happen right away.

The good news is so long the engine isn't running, there's not much harm from having fuel contaminated oil.

One way the mechanic may be able to determine whether the engine oil has been contaminated is by simply taking a whiff of the dipstick, however, cheap insurance is to fix the cause of the problem first, then change the oil.

Another tell-tale sign is if fuel comes out of the exhaust thou with these scooters that may not always be visible.

But don't ride that scooter until ...
  Reply With Quote
Old 02-27-2013, 02:53 AM   #7
bloodymomo   bloodymomo is offline
 
bloodymomo's Avatar
 
Join Date: Aug 2012
Location: Muskegon, MI
Posts: 97
Couldn't agree more. Wise words my friend!
  Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:04 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.