|
Nice looking scooter, sounds like you got a bargain. If it were mine, I'd want to tear it down, (remove all plastic) and make sure nothing was going to come unfastened, fall off, or short out. I'd want to check the steering head and most likely add some grease. I'd remove every bolt or nut I could get to, put a drop of blue Loctite on it, and reinstall. Undo each electical connecter, to add a bit of dielectric grease, and then snap back together. Add a dab of silicon caulk to each of the screws that hold the body panels on when reassembling.
In other words do a complete PDI. Very important to do this to a new one, and as I see it, every bit as important to perform one on a used scooter as well. The people that don't/won't take the time to do a PDI, are the ones on these forums with a new problem every week.
I bought my Jonway new, just shy of 3 years ago....and it's been a great little scooter....and so far, has never let me down...but it was not built or assembled quite like a Mercedes, Audi, or BMW.
|