Gear Oil Drain Plug

rks · 06-04-2016, 05:48 AM

There are washers made of a nylon like material, for this purpose, and available at autoparts stores. You'll find them in packages of 5 or 10, hanging somewhere near the drain plug area. I use one under the oil temperature sending unit, that screws into the drain hole on the left side of my scooter's engine (157QMJ). If you can find one small enough to fit the tranny drain, it would work great.

If not, I'd go with Teflon tape as suggested above.

06-04-2016, 05:48 AM	#6
rks Join Date: Dec 2013 Location: Western New York Posts: 454	There are washers made of a nylon like material, for this purpose, and available at autoparts stores. You'll find them in packages of 5 or 10, hanging somewhere near the drain plug area. I use one under the oil temperature sending unit, that screws into the drain hole on the left side of my scooter's engine (157QMJ). If you can find one small enough to fit the tranny drain, it would work great. If not, I'd go with Teflon tape as suggested above. __________________ 2011 Jonway 150cc..16,109 breakdown free miles, and counting
	0